• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

2000 grand prix gt.



Jack and support the front of the car.
Remove passenger wheel and splash shields
Going through the pulley of the pump, use a 13mm socket to remove the two bolts at 12 and 6.
Carefully remove the wire connector that should be attached to the back of the pump.
Moving the pump around, find your best way to remove the hoses.
Sneak pump out
Install new pump.
 
i took the hoses off first, left a bucket under the it to catch the old fluid that will leak out.


then you will need a p/s pump pulley puller and installer.,,,same tool to get the pulley off and back on the new pump.
 
You must log in or register to reply here.
Back
Top