• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

1999 gtp



Re: Ty's 1999 GTP Good Mufflers?

Took the exhaust system off my car yesterday because I had like 3 different exhaust leaks. I found one of them I want to get new mufflers, but I cant find a good thread on any good ones? I have been looking at borla, but idk what ones are good!
 


Re: Ty's 1999 GTP Good Mufflers?

Just get cheap turbo mufflers and a long glass pack for the resonator. Make sure you keep a resonator, or you will have rasp city.
 
Re: Ty's 1999 GTP Good Mufflers?

Borla Pro XS, probably the "best sounding" mufflers for these cars, but are on the expensive side.

Wicked Nicky's has good prices on these.
 
Re: Ty's 1999 GTP Good Mufflers?

Hey guys its been a while since I have posted, Yesterday I replaced my fuel filter and when replaced it, alot of black stuff came out of it, I think that it might be the original(my car has 193xxx) . I have still been having my problem with my car acting like its hitting the rev limiter at 3000 rpm. So after I replaced the fuel filter, i test drove it and it did the same thing, so i put my fuel psi tester on it and, it was holding about 45 lbs. I know more than likely its the fuel pump, but could it be something else?
 


Re: 1999 gtp (engine pull in process)

Pulling the engine in the GTP, now that I have the truck, i wanted to start cleaning the car up, because grand prixs arent fast, i wanted to make a show car (seen a grand prix in my towns car show that motivated me). Pics will be posted some time today!
 
Re: 1999 gtp (engine pull in process)

Yep. Im debating doing that to mine too. Not really a big deal, takes about 4hours to yank the motor out with handtools and no help.
 
Re: 1999 gtp (engine pull in process)

You planning on going out the bottom or?

If it only takes that long I would do it too if I had a garage so that no one would steal or mess with my shizz
 
Re: 1999 gtp (engine pull in process)

Engine out the top, trans stays in. Pop the hood off, lay a blanket over the roof and set hood on roof. Zip out all the bolts/hoses/electrical connections and bam, shes out.
 


Re: 1999 gtp (engine pull in process)

Im pulling her out the top with the trans, the only thing left is the cv shafts, I want to clean everything paint stuff, and since I want to make a show car I want to have some of the rust fixed around the front shock towers. I may also put a mild cam in her just for the hell of it. Im starting in the front and moving back, so next will be fender and rocker rust. The inside will be last!
 
Re: 1999 gtp (engine pull in process)

engine and tranny are out, was kindof hard for my first time doing it, but it was fun, now the fun of cleaning starts! Pic will be posted some tome tonight!
 
You must log in or register to reply here.
Back
Top