• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

1/4 mile time??

G

gtp02

New member
what do you guys think my 1/4 mile time would be with the following mods. ssac headers, 3 in dp, no cat, no res, thrush muffs, k&n intake, stage 1 tb, ported blower and lim, 1.9 rr, 105# springs and retainers, 3.2, 3.29s and a transgo shift kit with a custom tune
 




I am going to guess the 3.2" pulley will be a bit too small for the mods listed and the timing will have to be pretty low to not knock. Also, assuming you have to ask, you are a track noob (nothing personal, we are all a noob at some point!).

So, I predict a 15.2 ¼-mile time at 98MPH. ;)
 
well when you get it mods done, go to strip and find out, then let us know. you might turn low 14's around 97. maybe.
 
JoshMcMadMac said:
I am going to guess the 3.2" pulley will be a bit too small for the mods listed and the timing will have to be pretty low to not knock. Also, assuming you have to ask, you are a track noob (nothing personal, we are all a noob at some point!).

So, I predict a 15.2 ¼-mile time at 98MPH. ;)
Click to expand...

lol I ran that stock with just a catless DP and no tune with all the codes thrown.


Oh and hot lapping the **** out of it with a friend in the passenger seat. (both of us are fat)
 
I ran a 15.0 @ 95 BONE STOCK...down to the paper air filter...put a FWI and a 3" DP on it and ran a 14.57.

So...if your not knocking...I say maybe 13's...but prolly like 14.6 your first few times because your gonna blow the tires off.
 


na i know how to drive it lol im not a track noob. right now i have ssac headers, 3 in dp, no cat, no res, thrush muffs, k&n intake, stage 1 tb, 3.4" and dhp pcm with someother small stuff and ran a 13.57 i was thinking about 1.9s, p&p blower, and a smaller pulley, i might not go to 3.2 i just wanna go to a smaller pulley and custom tune and just wanted to know what you guys thought on the 1/4 mile time it might post
 
With the rockers and ported blower you should be able to do a 3.2. I would really look hard at the tune because you're getting close to maxing out your injectors at this point. I say 13.2x
 
ran that time last year. im waiting for this season to start up again so i can take it back to the track. i might go to a 3.25 or a 3.3 and add more timing. im getting a prj tune this spring
 
I'd say realistically a 13.4 @ 102 -those 3.29's will get you there quicker, but you will lose MPH's.
 


You must log in or register to reply here.
Back
Top