I'm curious about this because my unlock takes a couple of tries. I just replaced the battery, didn't help the inconsistency.So my key fob is acting up, the unlock and trunk buttons work but the lock one does not.....might have to take it apart? Anyone done this before?
I was having inconsistent issues with my remote. Turned out that the little metal holder that the battery slides into had come loose from the board. I resoldered it and all was well.
Well Well Well stealthee be the man.
Just soldered mine, one side had let go.I also cleaned the black gunk
from the back of the buttons and the board spots with a kleenex and toothpick.
badda boom badda bing all good....works like a champ
I've got tint and have at least a 100 foot range on my FOB.
I'm gonna estimate and say she'll run the strip in 15.46