• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

04SS Imp is Ready to take out the Grocerys!!!

Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

heck yeah, stick that gen v on that motor. why wouldn't you??

how much that motor cost you?
 


Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

Idk man I might stick with it..

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

Progress !! Almost finished

20131226_140608_zpsf25bb213.jpg


Cut the bolts with a angle grinder for the header install

Rear Headers ready to go in
20131226_140631_zps247000a6.jpg


Painted Gen 3 Blower Again lol
20131226_140847_zps6177ca69.jpg


Engine in
20131226_101041_zps62a09124.jpg


Plugging harnesses
20131226_114332_zps90b86331.jpg


Machined Lower Intake Manifold with Fresh LIM Gaskets on
20131226_140548_zps8893fe59.jpg


Got dark so the finish product is looking for the end of the weekend stay tuned!!!



Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
Last edited:
Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

you better sand that paint off the mating surface of the lim or its gonna leak
 
Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

Mating surface isnt painted just the top portion of the Lim but thanks man she is almost done hows your build coming along

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

last of parts come in Thursday. porting blower inlet more. balancing inlet is more work than I thought. gonna perfect outlet as well. installing lifters and pushrods this weekend. gonna pull my fuel pump to make sure its connected right
 


Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

TEK310 said:
last of parts come in Thursday. porting blower inlet more. balancing inlet is more work than I thought. gonna perfect outlet as well. installing lifters and pushrods this weekend. gonna pull my fuel pump to make sure its connected right
Click to expand...

Good man fuel pump resistor and or bypass is stopping my build right now man smh gonna get it running hopefully tomorrow

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

After that startup it won't crank over now still tryna figure it out the fuel relay bypass tab 85 was bent car was running great after a battery charge car won't crank any ideas redcompg?

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 


Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

These are the normal grounds, just make sure they have good connections and such (disconnect the battery if you unbolt the grounds to clean the connections):
1 and 2 in this picture.
573575.gif

#5
573890.gif

Major grounds at 3 and 4
573892.gif

1 2 and 3
573555.gif

#5 under the steering column
573591.gif

#1
573893.gif

#3
573896.gif

#1
573621.gif


It's always a good idea to check and clean your grounds, but as a sort of "test" take some jumper cable and connect the black wire to the (-) on the battery, and the other side of the black wire to something metal on the block. The red wire will NOT be used in this test. Once connected, try to start it, if it starts or acts different in any way, the grounds are your problem.
 
Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

Thanks checkin them this week...

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

take your plugs out and pull fuel relay. see if anything shoots out of cylinders like coolant
 
Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

TEK310 said:
take your plugs out and pull fuel relay. see if anything shoots out of cylinders like coolant
Click to expand...

Please explain before I do this what is this to see? never heard of that

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 


Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

It's to see if anything is getting into the combustion chamber that shouldn't. IE: Coolant, lots of oil, lots of gas, etc.
 
Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

^^^ exactly. seems I will have to do this too now.....
 
Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

How's it coming along tek310 any leadway?

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
Re: Black Mamba Gen V Xp P&P Heads Build in progress!!!!

Make sure you keep track of which spark plug comes out of which cylinder, you'll also want to pay attention to what the plugs look like. Use this:

reading_spark_plugs.jpg


Smell the plugs as well, you can normally smell the gas and antifreeze, and you'll see the oil.
 
You must log in or register to reply here.
Back
Top