• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

04 Glove Box Handle Broke



Never messed with an 04 before, but I worked on an Imp that had this issue and had to unbolt/unscrew the hinge at the bottom to get inside it enough to trip the latch and then replace it. If you lay on the floorboard and look up you should see what I mean.
 
FordMan77 said:
Never messed with an 04 before, but I worked on an Imp that had this issue and had to unbolt/unscrew the hinge at the bottom to get inside it enough to trip the latch and then replace it. If you lay on the floorboard and look up you should see what I mean.
Click to expand...

This or bust out a flathead.

It's a pain finding a replacement glovebox handle
 
I used a pair of needle nose pliers to open mine and found some goodies in there when i did get it open.
 
I haven't tried to get in there yet, but ill try all your suggestions. I know that newgmparts.com has everything for gm cars so ill just buy a new "door" and the handle will come with it. this is the 3rd vehicle from GM that I or someone else broke the glove box handle.. junk!
 


thought that I'd copy you! lol. Its got not even half the miles my GTP has so i thought that I'd slowly get the Comp G going. I'm not used to the stock sound of these cars and the performance. Its weird.
 


The SE lip is pretty sweet. Much cheaper than my GXP idea. I never seen a GXP wiring harness for the signal and fog lights so I'm not even sure if i could get it going properly. The car has to go and get inspected from my insurance company when I'm done, so I cant half ass anything, its gotta all look OEM.
 
hammerline81 said:
The SE lip is pretty sweet. Much cheaper than my GXP idea. I never seen a GXP wiring harness for the signal and fog lights so I'm not even sure if i could get it going properly. The car has to go and get inspected from my insurance company when I'm done, so I cant half ass anything, its gotta all look OEM.
Click to expand...

Yea I wanted a GXP bumper at one point but could never find one for a reasonable price so I said f it and I'm glad I pulled the trigger on the SE lip. Prices have gone up quite a bit. I'm sure you could make your own harness or just hack up a 04 one to make it work.
 
yeah! a used one i found from a auto wrecker was $580.00. that's without the whole assembly, only the cover. i thought that's a retarded price.
 
You must log in or register to reply here.
Back
Top