• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Ultra440

  1. Ultra440

    Heat cutting in and out

    The blower motor stops and goes but the electronic readout and buttons always works as it should. It has cut off when hitting a bump on several occasions and usually won't cut back on until another bump is hit. Any idears? Sent from my SAMSUNG-SM-N910A using Tapatalk
  2. Ultra440

    Warning- DSMUTS

    This guy sold me a car and lied about the odometer (which was out due to him breaking the resistors off of the cluster circuit board). Said it had 160000 and it ended up having 210000. He was also supposed to follow up with me on the missing center cap and I have not heard back from him. Buyer...
  3. Ultra440

    New wheels

    I HAVE to get tires tomorrow. Took a 44 hour road trip amd my belt is showing on my passenger front tire. Came up on some money so id like to get wheels too. Been watching some 18" verano wheels I can probably snag for 600-700 with brand new tires. I'll likely pick these up tomorrow. Other...
  4. Ultra440

    Wtb 3.6 modular pulley

    Holler if you got one. Got a road trip next week, would like to be able to let other people drive.
  5. Ultra440

    Oil pressure craziness

    So I started my car this morning to let it warm up. Notice the oil light on, so I shut the motor off and top off the oil (it was down to the bottom "empty" hashmark). Start it back up and the light is still on. Dash oil pressure gauge reads 0. remembering I replaced an oil pressure sensor for...
  6. Ultra440

    Help me pick out new wheels

    Alright so it's finally time to pull the trigger on some wheels. I found 3 that I like within my price range, but I like them equally as much. Opinions are welcomed. Set 1- 18" vogue for $600obo Set 2- MB motoring 17" anthracite/polished for $420 Set 3-konig 18" polished for $540 Well?
  7. Ultra440

    Wheel stud

    I apparently put a lug nut on crooked and stripped out one of my studs. Never had this happen before... does the whole hub need replaced to replace the single stud?
  8. Ultra440

    Its too big

    Anyone ever hear of a pump canister swelling in the tank to the point that its too big to come out of the access hole? I went to install a walbro over the weekend and couldnt get the old pump out to replace it. The canister was just slightly bigger than the hole it was supposed to come out of...
  9. Ultra440

    60# injectors and walbro

    Injectors sold I have a 255 lph walbro pump for sale. brand new in box. non venturi. Asking110 shipped Location is 45044
  10. Ultra440

    Ev1?

    I am looking for a set of 60lb dekas for my e85 conversion. I found a set but I have no clue if these are what im looking for... They are a good price but do I need to be cautious about buying used injectors? From the images ive pulled (mostly mustang forums) thrse appear to be the ev1 style...
  11. Ultra440

    3.5 for 3.4

    Im looking to gain a few ponies, anyone trying to get rid of a knock retard or two?
  12. Ultra440

    Coincidence?

    So I changed my trans fluid and filter along with and oil change on NYE. Drove around quite a bit after the oil changes, id say 40-50 miles. Everything gravy, lovin life. Now yesterday I leave for work and I notice that my LTFTs are up around 16, drops when I give it gas (0 LTFT at WOT) and...
  13. Ultra440

    Creaking when turning wheel

    I get a creaking noise when turning the steering wheel either direction. There's fluid in the PS res, now... where do I start?
  14. Ultra440

    Trans woes

    Okay so I bought a pop up camper and while I'm trying to convince the woman to pick up an ss trailblazer, my short term solution is Buick upgrades. I'm in the market for a Trans cooler and shift kit... Well a hitch too but I think I got that covered. From what I've read, Transgo shift kit is...
  15. Ultra440

    Maf same on sc and NA?

    Is it? There's a local guy with a 99 park avenue base model that blew a motor and he's parting it out. I'm gonna go yank as much stuff as I can from it. Is the maf the same on both na and sc?
See more
Back
Top