• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

aeroforce gauge

gtpsleeper

gtpsleeper

New member
got it hooked up and everything but in order to turn it on i have to unplug it and plug it back in everytime? any ideas why?
 


Cause thats the way it works. in order for it to come on with the key u have to do the wiring. It tells u how in the directions I think u just run the red to a switched 12v idr right off ill go out an look at mine in a minute for ya .
 
yep red goes to switched 12v an thats it. the green and red u do not hook to anything. O also in order for wiring it like that to work u have to pull the the small red jumper out of the back of the gauge
 
Last edited:
speedemongtp said:
yep red goes to switched 12v an thats it. the green and red u do not hook to anything. O also in order for wiring it like that to work u have to pull the the small red jumper out of the back of the gauge
Click to expand...

Red is for a switched source, and you do have to remove the jumper on the back of the gauge (if I remember correctly). The other two are for the analogue inputs.

Glad you got the gauge. Let me know if I can help anymore.
 
alright its ready to go now! totally skimmed over that in the directions....whoopsy! thanks guys!

BTW thanks for the gauge sabre!
 


I did this...the add-a-curcuit...works like a charm!

21wAMu2jHsL.jpg

fusebox.jpg
 


You must log in or register to reply here.
Back
Top