• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Red 2006 Grand Prix GT Supercharged

Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

Get the 5" backing plate and use 5.5" pads. You'll be using mostly orange pads for correction and white to polish.. Yellow is for serious oxidation and more then likely you won't ever need to use that.
 


Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

Alright, I'm on auto geek right now just reading up, I was gonna grab a 5 inch backing plate most likely then run 5.5s. Orange is looking like scratch n defect removal. Yellow was saying it's the deepest cut, so I'm hoping it doesn't need those, I don't think it does. Should I grab a red or black or any for applying wax? I'll get 2 orange, 2 white, then 2 more of idk? With 5 inch backing plate.
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

Well you want to take the least aggressive method when it comes to removing defects and orange will knock just about anything out now you don't want to completely kill the clear coat that's why I avoid yellow especially on a DD. I would grab at least 3 orange pads, 2 white pads and if you like a black for apply wax etc . Personally I always wax by hand so I never really used the black pads that I had.
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

Are you planning to wax by hand or by machine? If you want to do it by machine then I would go 2 orange, 3 white, 1 black. If you are going to do it by hand then I would go 3 orange and 3 white. You will be using the white ones more often. Try a test spot with a white pad and ultimate polish first. If you need more correction then go with the orange and ultimate compound.

4" pads also come in handy for those smaller areas such as the pillars and in between the front of the sunroof. You will also need the backing plate for that. I actaully use the 4" black pad to apply wax on larger panels.
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

The Guz said:
Are you planning to wax by hand or by machine? If you want to do it by machine then I would go 2 orange, 3 white, 1 black. If you are going to do it by hand then I would go 3 orange and 3 white. You will be using the white ones more often. Try a test spot with a white pad and ultimate polish first. If you need more correction then go with the orange and ultimate compound.

4" pads also come in handy for those smaller areas such as the pillars and in between the front of the sunroof. You will also need the backing plate for that. I actaully use the 4" black pad to apply wax on larger panels.
Click to expand...

Thanks guz, I ended up getting 3 orange, 2 white n one gray. I won't know what to use n how I want to do it until I actually try it n what I feel comfortable with. But that's a good idea, I'll go ahead with white first and then orange if need be. Most biggest problem I'd say are swirl marks, they're everywhere. Lol. Not too many scratches, but there are some here n there.
 


Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

I finally routed a hose around my house since I only have a spicket in the back, then washed, n buffed the front end of the car. The temperature went down n didn't wanna do the rest with it colder out. Also cleaned the rims n shined the tires up. I used an orange pad n some Meguiars compound. Made it look a lot better than the untouched areas, still some swirls tho. Just some quick pics.

 
Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

Looks good. Those deeper swirls will need more work. Try a few more passes with UC. Speed 5 with moderate pressure and slow arm speed is what you want. You may have to go to a more aggressive compound like M105. These cars can have hard clear coat so that could also be another issue you are running into.
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

So I got some new climate control knobs. Flows with the chrome inside a lot better. Also got some new battery terminals, mine were always loose fitting n could pop off real easily. Didn't know if it was messing with anything. I like em, just would have been easier with a philips or strait bolts instead of different size Allen head for each.



 
Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

I used to have those battery terminals on my truck's battery, but when I went to dual batteries I soldered everything. They worked okay, just corroded the wired connection (not post) pretty quickly. I'd at least check them every other oil change or so just to make sure they don't get too bad.
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

Will do man, thanks for the heads up. I just needed something with more options as far as wiring connections. If they have problems I'll just get some ordinary ones.
 


Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

If you know how to solder, that's the way to go. With these big wires, a propane torch (the smaller the better) works. I put a towel down over the batteries\car\such, then tin foil over that so the solder didn't melt through anything. Towel was also to protect the batteries from the foil....tinfoil directly on top of car battery...what could go wrong? Hold a copper connector with vice grips, heat the connector, and fill with solder back at your bench, so you don't have to have a propane torch under your hood that long. You will have to tin the wire under the hood, then just heat up the solder filled connector, and put the tined wire into the liquid solder in the connect. These terminals: http://www.oreillyauto.com/site/c/d...ery+terminals_-1_-1&keyword=battery+terminals
Here's the general idea I've ended up with, no problems so far, through 2 summers:
p1030002.jpg

Not the best picture, but you get the idea.
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

Def need to learn how to. I will be experimenting soon with doing it just to know and learn it all. I hate crimping n all that bs. Also, it will prepare me for a wire tuck if I ever get comfortable enough with it. Thanks
 
Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

Overlooking your "add on's" and focusing on those warn heater buttons ~_~
 


Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

GrandPrix06GT said:
So I got some new climate control knobs. Flows with the chrome inside a lot better. Also got some new battery terminals, mine were always loose fitting n could pop off real easily. Didn't know if it was messing with anything. I like em, just would have been easier with a philips or strait bolts instead of different size Allen head for each.



Click to expand...

Where did you get those knobs?
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

The new knobs look good. The rest of the buttons have seen better days. Time for some replacements.
 
Re: Red 2006 Grand Prix GT Supercharged - FSIC, GXP Seats & Coilovers Installed!

Don't want to pay 65 bucks for something that still works because it's chipping. I've contemplated just covering em with black paint, or if I could have stickers cut out n made for them lol.
 
You must log in or register to reply here.
Back
Top