• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Gtx has a turbo!! lol



Re: so bad sound from engine help me lol

Ok so took off belt to the supercharger and kr was still going, its time to just build the other motor and tranny, but Soo I need some questions answered how can I make sure the cam I have is a nic cam, guy Ihear he is shady, i have push rods,nic cam if he was telling the truth, gen v supercharger, ported heads with 105 springs.
Things I want is
-modular pulley system
-headers
-gen v adapter for gen 3 tb
-gaskets( not sure what I need I have metal lim gaskets and a metal sc gasket)
-maybe cam
-hardened input shaft
- timing chain? Car has 123xxx
If you guy's can help me out im not sure what more I need for this build and to fix the tranny, thank you guys.
 
Re: motor seems f*©<ed up bad knock, going to try and start my cam build

20130831_180448_zps5e0398c6.jpg

20130831_180402_zpsa5cac46f.jpg

Just a look how it will be in the new car
 


Re: motor seems f*©<ed up bad knock, going to try and start my cam build

Looks like someone started polishing, lol. Is that the L67 LIM?
 
Re: motor seems f*©<ed up bad knock, going to try and start my cam build

That's what I did, I hear polished parts are REALLY hard to keep clean and polished.
 
Re: motor seems f*©<ed up bad knock, going to try and start my cam build

Take a picture of the side of the cam it should have the specs on it
 


Re: motor seems f*©<ed up bad knock, going to try and start my cam build

Drop the pan and see what you find. Sounds like you need a new engine
 
Re: motor seems f*©<ed up bad knock, going to try and start my cam build

Ginseng said:
Drop the pan and see what you find. Sounds like you need a new engine
Click to expand...

Lol yeah I have one in the garage going to build if Ican get ewhat I need, can someone tell what cam that is if it really is a nic?
 
Re: motor seems f*©<ed up bad knock, going to try and start my cam build

What are those number engraved on the cam? I can't really make it out since they are blurry. I'll look around and see what I can find once I know them #'s.
 
Re: motor seems f*©<ed up bad knock, going to try and start my cam build

I think its 14804 20/30 with a z in the green spot
 


Re: motor seems f*©<ed up bad knock, going to try and start my cam build

Sorry man, I've looked and looked and can't find anything online. I don't have any other resources, maybe someone else can chime in?
 
Re: motor seems f*©<ed up bad knock, going to try and start my cam build

Booba5185 said:
Sorry man, I've looked and looked and can't find anything online. I don't have any other resources, maybe someone else can chime in?
Click to expand...
Yeah maybe one of the guys who have been here for sometime might know, thanks for trying though
 
Re: started tear down of the 01 motor

20130906_215621_zps3c233afb.jpg

Painted the gen v looks nice almost had it polished but I don't have the cash too buy the extra bits, im waiting for my check to get parts probably not going to do the cam build just yet because nobody can tell if it actually is a nic cam but unless zzp gets back to my message about it I will have to just do a 3.4 on the gen v with ported heads 105springs tune and headers with 3in dp no res with slp cai. I pulled apart the motor got down to one side value cover and I found sludge how could I clean that out?? Whats funny is the 98 motor look so clean compared to this one and this one has literally half the mileage at 123xxx lol
 
Re: motor seems f*©<ed up bad knock, going to try and start my cam build

I will get pictures of the motor when I go outside
 
You must log in or register to reply here.
Back
Top