• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

What did you do to your Car today?

Status
Not open for further replies.


Cleaned it and oil change. Took a pic
B82FF7AA-5AA3-49F5-9AED-18D1A34B655B-1370-0000004A3EF0AE83.jpg
 
welded my rear muffler bracket in place, over winter i dropped the cat back to fix some holes in the pipe and the hangers were falling off, well i snapped a bolt in the rear hanger, got that now welded tight. no more rattles from that. also found the clamp on hanger i put on was hitting the rear sway bar, moved that thing over.

had a nice rattle free ride home.
 


Replaced tranny mount and rotated tires. Motor mount is tomarrow.
oh and found out a tie rod is bad during the process
 
Gave it a plug change, been well over 15K since I changed the copper plugs, threw in some AL606, washed it and drove around FT. Polk picture whoring it up. Pics in my thread unomomento.

Not to bad for over 15k copper, all looked the same.

 
Last edited:
The Guz said:
Replaced my warped UIM on my L36 and in the process the 5/16" fuel line broke right at the connector. Now I need to find a connector and splice it in to the factory line.
Click to expand...

Had to go to the salvage yard and pick up a 5/16 line since the parts stores only carry the 3/8 line. The car is back up and running.
 


Cleaned my engine ground, and main frame ground right off the battery. Also cleaned the ground points on the alternator. I swear my windows roll up/down a little faster now.
 


Status
Not open for further replies.
Back
Top