• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

BBS wheels



bolt pattern is 5x115 on our cars, but 5x114.3 fits. it will depend on the offset and wheel size if they will fit well.
 
they'll fit fine. you'd be best off checking to make sure the hub bore is big enough or you may end up having to run spacers or getting the bore machined to fit.
 


I just knew they looked familiar, seen them around quite a bit lately, on 2 cars, found pictures online for what I mean. Not sure they will fit tho, check back spacing and wheel width and ALL the points to ensure they will fit

110153d1284328285-need-18-wheels-2011-mustang-5-0-will-fit-over-brembos-enkei-wheels-010.jpg

110154d1284328285-need-18-wheels-2011-mustang-5-0-will-fit-over-brembos-enkei-wheels-009.jpg

110152d1284328285-need-18-wheels-2011-mustang-5-0-will-fit-over-brembos-enkei-wheels-012.jpg


Now before the Haterade starts, the BBS is prolly just an aftermarket version I know, but just referencing they are most likely modeled after these, so if they follow same design, make sure they will fit before you buy :th_thumbsup-wink:
 
Bio248 said:
they'll fit fine. you'd be best off checking to make sure the hub bore is big enough or you may end up having to run spacers or getting the bore machined to fit.
Click to expand...

I talked to the guy, we are metting up to test fit the wheels before i buy them.


miker56 said:
I have a set of rims that are forsale
Click to expand...


The only wheels i would buy would be split spoke that came on some 05s or the competition package.

I have these dull 16" - 5 spokes and i hate them!!
 
TLSheff said:
I just knew they looked familiar, seen them around quite a bit lately, on 2 cars, found pictures online for what I mean. Not sure they will fit tho, check back spacing and wheel width and ALL the points to ensure they will fit



Now before the Haterade starts, the BBS is prolly just an aftermarket version I know, but just referencing they are most likely modeled after these, so if they follow same design, make sure they will fit before you buy :th_thumbsup-wink:
Click to expand...


they look like BBS replicas, but thanks for the post.
and i cant believe my eyes, this guy has a gt500 with enkei rims. :o



IMG_0186.jpg
 


Some evo's had bbs wheels and so do Sti's both will fit but their hard to find with the right offset and most people want an arm and leg for them.

Ive tried searching a few mustang forums and ran across a few but most of them guys have staggered setups and only the front 2 would fit most rears are too wide.
 
those kind of wheels are also available as 2 pc. ive mostly seen them on 1999-2002 Saab 9-5 Aero. (i work at a saab dealer. i want the 2pc bbs baaadddd)
 
You must log in or register to reply here.
Back
Top