• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

zzp stage 2?

daytonagtp23

daytonagtp23

New member
hey i was just wondering if anyone has the zzp stage 2 performance kit? is it worth getting? my car is basically stock besides a cheap open cone air intake.
 


Well my car is bone stock, and I'm just glad I found this forum before I started throwing money at those people. Honestly it's not worth it you get no discount for buying several parts and they generally charge more than other vendors. Go to advance auto parts get some 104's and a 180 t stat. Then go to some hardware store and get parts for fwi (fender well intake) there is a writeup on that. IDK man you don't need the kit you can do it way cheaper on your own parting it together by the way I have a 3 inch catless dp for sale if you want that. It will eliminate the u bend and cat, unless you plan on running headers.
 
^^104's are too cold of a plug for a stock pulley. They are for a basic 3.4" setup. You want to run the hottest plug you can get away with...so in his case...I'd say Autolite 605's. And keep the stock T-Stat until you get a tuned PCM...because it'll do you no good without a tune and the fan turn-on turned down temp wise.

Again...READ MY THREAD.
 
ls6velless454 said:
Well my car is bone stock, and I'm just glad I found this forum before I started throwing money at those people. Honestly it's not worth it you get no discount for buying several parts and they generally charge more than other vendors. Go to advance auto parts get some 104's and a 180 t stat. Then go to some hardware store and get parts for fwi (fender well intake) there is a writeup on that. IDK man you don't need the kit you can do it way cheaper on your own parting it together by the way I have a 3 inch catless dp for sale if you want that. It will eliminate the u bend and cat, unless you plan on running headers.
Click to expand...

Not to hijack the thread, what do you want for you DP?
 


go get some autolite 105's (or 605's) can't remember, cheapest one, try .060 gap, get a 180* t-state. search our "for sale" threads and save youself some $$$$.
 


TOGs are a set of headers (the other guys). they are very expensive for what they are, but are commonly refered to as one of the best sets of headers you can get for our cars. i dont like them because of their 3 piece design.
 
S&S or SSAC, S&S will be more expensive, but i think they are the best designed headers for our cars. SSAC are redone SLP knockoffs that are actually very well made.
 


You must log in or register to reply here.
Back
Top