ZZP polyurethane engine mount

[Dee23]

38mm=1.5 inches

 

[Dee23]

38mm=1.5 inches

 

[Dee23]

Moog has a 38mm swaybar bushing set on rockauto but aren't those the same brackets?

 

[Dee23]

i got mine at advance auto, some moogs not polly but are holding up well. moog dont seem to come in metric, so i took two sets out to the lot and test fitted them before buying.

ive got the dorman 33 mm bar and i think i used the middle size. you can look up whats closest to 38 mm in English standard.

Well rockauto has the 38mm Moog bushings but brackets don't come with it, but you said any of the brackets would work correct?

 

[Scottydoggs]

thats how it was for me. all 3 moogs would fit the cap, its the hole thats larger or smaller.

 

[Dee23]

Oh well my brackets take the same 15mm bolts to hold them down as the stock brackets and bushing did

 

[Dee23]

So since my current brackets take the same 15mm bolts as stock then a regular bracket should fit and tighten down over my current bushings?

 

[Scottydoggs]

like ive said the caps are all the same, the bushing hole sizes change.

 

[Dee23]

Ok cool, so that's what I was confused on. So I just need to find a auto parts store that has my original stock Swaybar bushings and brackets, but I'll just use the bracket.

You think AutoZone has it? Bc the website is saying they don't have it

 

[Dee23]

Or naw?

 

[Scottydoggs]

call around to a few stores. dorman has to make em. they make every thing it seems.

 

[SomeDudeAtHome]

Do you have a stock sway bar? And you're talking about the metal piece that goes around the bushing? Because the moog sets I bought when doing mine both came with brackets that fit perfect. Got them at Autozone.

 

[Dee23]

heres some pics off the broken bracket and the stock bracket I went and bought to replace it which leaves a gap in between the bushing and bracket itself. my sway bar came with bushings and the brakets/hardware so my brackets had fitted perfectly with my bushings which are a hardened material not that soft stock rubber.

remember I only used the OEM bracket around the bushing that came with my swaybar, I didn't use the stock bushing that came with the bracket but as you can see it leaves a gap

passenger side still has the original bracket that came with this swaybar which bolts tightly down on the bushing

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]