• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

ZZP garlock gasket?

Cause you're asking questions to things I been doing for years and I'm giving you a straight up answer?
You can beat around the bush asking the same questions that have been answered 1,000,000 times before (no one told you to "go search" which most forums do) or learn by yourself or take the advice clearly typed out by Scotty or others who took the time out their life to answer you.
So don't be a salty Sally.

yes. I use my propane before I spray ANY solvents in my freshly done engine bay
 




As your transmission thread had your question answered in the first 3 posts.

If you researched the 2 kits , trans go and Intense , you would see the reason I suggest and went with intense is because it's not plastic like zzp kit and it includes everything. A detailed instruction booklet with pictures , all the hardware. A container of grease. The scotch pads and a filter. Literally all you need is the fluid. Which I would also suggest dex3 because it's already in there unless you had a flush or fresh build and they might have used 6. I used 6 when i built the new transmission.
 
I only see good advice being given. Sometimes people read hostility when now was given.

I used the garlocs with a little RTV on the inside edge. No problems. They are great to use as a pattern for cutting open up the LIM under the intercooler.

The touchy area is directly under the snout. Things get a little narrow there.
 
Okay but anyways maybe I took that a little wrong my bad whatever do you guys think a ssic is worth buying? I can only run a ssic because of my GT heads debating on trying to get a little more outta it.
 
I would answer you but I would like you answer me first and explain (or show) how I'm arrogant to others ?
It's ironic cause I'm the exact opposite of being arrogant and tell others to quit being "bitter"
 
It's the interweb grow a pair and stop getting butthurt.... and start using the search function it can avoid all these common threads


Back to topic.. there called garleaks for a reason, most guys hate em.. of course some guys had good luck with them. I use either rtv, or l32 metal gasket. Unless you have a vacuum leak than leave them.
 


You must log in or register to reply here.
Back
Top