• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

zzp fuel pump rewire

Hawkman

Hawkman

New member
Hey just wondering if someone can get me pictures of how they did there wiring for the rewire and what wire they tapped into i kniw the instructions say the gray wire but? really zzp! ipulled of the fuse cover block and see the gray wire that goes into the pannle and cut it to have a little extra hanging out and hooked up the bluewire to the wire coing out od the fues box. hooked the rest up in the back installed new grounds and car starts and runs for 3-5 sec and dies the power to the pump stops wtf is going on? am i missing something or doing this wrong ? Thanks for any help
 


When cut the gray did you splice both ends to the blue wire or just the one coming from the fuse box?

I personally didn't like the zzp rewire, it was poorly made. The Casper rewire, found from Wbodystore, or the racetronix, found on prj performance, is a much better quality rewire.
 
i did not splice both ends only the one coming out of the rear of the fuse pannle. If i known how crappy it was i would have went with one of the others now lol. live and learn! so splice both to the blue wire then your saying? thanks
 
You must log in or register to reply here.
Back
Top