Zzp catback

[Acdc88]

Can anyone take a picture of their Zzp 2.5" catback at the rear subframe/ Swaybar? My new swaybar is making contact with my stock exhaust and the Zzp kit looks to be closer to 180 degrees at the y bend where the stock exhaust is more 160 degrees at the y.

I'm hoping the Zzp kit splits before the subframe and is parallel to the subframe. Then the swaybar back portion is just straight through to the muffler.

 

[blueguy]

Post pics.

I've installed a few rear sways and never ran into exhaust issues.

 

[Acdc88]

https://goo.gl/photos/faUVrrNbwm4nZArT8

i have about 1.5" of clearance between the bar and exhaust in the far left side of the lower portion of the bar. Looking into getting 3" poly hangers to solve the problem... Fingers crossed.