xxburkettxx07
New member
Put the zzp pcm in along with 3.4 pulley n shift kit cold air down pipe, when it's in performance shift God it jerks hard when shifting especially at wot. ThIs normal??
Zzp 1.0 ecm
- Thread starter xxburkettxx07
- Start date
depending on the shift kit level you put in and the raised shift pressure of the tune, then yes.
Either retune or adjust the shift kit.
Depending on how the jerk around is, Accumulator can have rough spots in there/crud and cause the pistons to catch abit.
But usually just lean towards "bang/screetch mode" of shift kit.. plus the higher pressure levels of the tune being the issue.
Either retune or adjust the shift kit.
Depending on how the jerk around is, Accumulator can have rough spots in there/crud and cause the pistons to catch abit.
But usually just lean towards "bang/screetch mode" of shift kit.. plus the higher pressure levels of the tune being the issue.
xxburkettxx07
New member
Think you're right just wasn't expecting all that lol
SgtMarshal
Active member
it takes some getting used to. I think its better for the transmission to shift faster because there is less slipping. if you find a local tuner or pickup a dhp programmer you can change how fast/hard it shifts, as well as many other things.
