• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

....you know what it is... 700whp build

Status
Not open for further replies.
Pssssst *awaiting tracking number for turbo kit purchased a couple of weeks back.* ;)

Interesting setup. Should make for some Nice gains.
 


heads were stock

update: clutch and head shot

finially uping to arp's and mls gaskets, getting the block ready for when my heads arrive all cleaned up. also some pure sex shots of the new clutch setup, this is a triple disc tilton clutch that will literally handle anything.

IMG_1624.jpg

IMG_1625.jpg


IMG_1634.jpg

IMG_1628.jpg

IMG_1633.jpg

IMG_1630.jpg

IMG_1627.jpg
 
No problem, when I get it back I'll provide all the info, they are just working on the mount for the pull to push conversion.. The clutch is designed for both the f40 and the Getrag 284.
 


t76 billet, with a spool valve, (turbonetics)
im running a walbro with a boost a pump

never got to the track
 


im going t4 with v band, divided housing .96ar the pool valve 1/2's that to build boost so it will be a .48 during spool. should make some serious jam.

if the trans fails them im getting it custom built with straight cut gears and such,

the supra make crazy power cause of lots of boost id assume, but my larger a/r should help me out aswell, we will see
 


I guess I failed to mention I was looking to hit 700 on under 22psi. :p


And fwiw there will be 30psi+ dyno runs

And again, no this car will never run 9s or anything close, 10s should be possible, but my traps will be awsome
 
Status
Not open for further replies.
Back
Top