• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

XP cam? or what cam to go with?

JoshsGTP

JoshsGTP

I GIVES MONIEZ
my 97 GTP is stock. but I got a nice ins. check. so do you have to pull the moter to put the cam in or what?
any advice?
 


Lots of info on this man.

Search...you can yank the motor...or drop the cradle and install it through the wheel well. Your going to need a tune...and headers...FOR SURE...and a smaller pulley to let that XP breathe...
 
How much is your check? Plan on cam, springs, retainers, timing set, gaskets, headers, PCM with a tune for the cam, intake, etc. Pulling the motor would be worlds easier, however it can be done with dropping the cradle from the passenger side.
 
What do you think...it is basically the heart of the engine...right in the middle...if your stock it isn't the first mod...try putting headers on first...if it takes you more than 8 hrs by yourself...your no where near a cam install.
 
bluegtp91 said:
What do you think...it is basically the heart of the engine...right in the middle...if your stock it isn't the first mod...try putting headers on first...if it takes you more than 8 hrs by yourself...your no where near a cam install.
Click to expand...


sorry I didnt mean to say that much work, I wanted to say that many mods to go with it.:)
 


You must log in or register to reply here.
Back
Top