• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

WTF?! Rear hubs

F

FuglyGTP

New member
How do I get the rear hubs off? I undid the three or four bolts through holes but its still on there solid as a rock! I need to put longer wheel studs on (they are too long to do without taking it off).
 


I wedged a chisel in behind the backing plate with a BFH, tried banging on the backing plate, the thing is solid as a rock.
 
I just looked it up to make sure I wasn't missing a step, and it's pretty straight forward. Remove the caliper with bracket, remove the rotor, disconnect the wheel speed sensor, remove the 4 bolts, and pull the hub out. Has to be rust, gotta love midwest winters.
 


You might just try a large 3-jaw gear-puller. That's how I got my front one off the very first time I did a hub change.
 
You must log in or register to reply here.
Back
Top