jspangler22
New member
So when i bought my car the top left part of my windshield molding is almost completely up. How easy is it to replace this molding
?
?
winshield molding
- Thread starter jspangler22
- Start date
jmt455
New member
Re: windshield molding
FSM says:
"Windshield Reveal Molding Replacement
The windshield reveal molding is an applied molding design separate from the window . The reveal molding is bonded to the windshield and may be bonded to the body. The reveal molding may be replaced with the windshield as an assembly, or the reveal molding may be available as a separate service part. Refer to Urethane Adhesive Installation of Stationary Windows .
The images show the glass bonded with a urethane sealer to the windshield opening pinch weld flange, then the acoustic seal and finally the decorative molding."
The only instructions regarding the molding:
"Install the new windshield acoustic strip (1) to the windshield (2), if equipped or damaged. The acoustic strip aids in reducing noise.
If installing a new window reveal molding, start in the center and work toward each end pressing firmly into place."
HTH...
FSM says:
"Windshield Reveal Molding Replacement
The windshield reveal molding is an applied molding design separate from the window . The reveal molding is bonded to the windshield and may be bonded to the body. The reveal molding may be replaced with the windshield as an assembly, or the reveal molding may be available as a separate service part. Refer to Urethane Adhesive Installation of Stationary Windows .
The images show the glass bonded with a urethane sealer to the windshield opening pinch weld flange, then the acoustic seal and finally the decorative molding."
The only instructions regarding the molding:
"Install the new windshield acoustic strip (1) to the windshield (2), if equipped or damaged. The acoustic strip aids in reducing noise.
If installing a new window reveal molding, start in the center and work toward each end pressing firmly into place."
HTH...