Will these fit?

[bluesfan4life1955]

Hey yall just wanting to get some peoples opinion on whether or not these would fit between the headllights also in the middle of the bumper and the core support

thanks again. Btw i already have a 5 gallon tank and all the required hardware needed plumbed and wired in my trunk :th_thumb-up::th_thumb-up:

 

[Scottydoggs]

whats the dimensions?

 

[bluesfan4life1955]

its a 5 trumpet setup as seen the longest horn is 22 inches by 3.25 circumfurance



№ 1 19.5″, № 2 16.25″, № 3 14.75″, № 4 12.75″№ 1 495.3 mm, № 2 412.75 mm, № 3 374.65 mm, № 4 323.85 mm


that is a better length and diameter of the horns and i know that the horn in the in the middle will fit it is small enough

 

[Bronco Boy]

Is there even 22" of clearance?

 

[stealthee]

They wouldn't fit without some serious hacking and modification. So not worth it for a few giggles.

 

[bluesfan4life1955]

even if i angle them side ways

 

[Scottydoggs]

only way i think that fits is if you mount a bracket top to bottom on the side of the rad support, then mount it to the bracket.

 

[SubwayGuy]

I want a train horn real bad lol.

 

[bluesfan4life1955]

im thinking of running two aiming to the driver side and the smaller of the 5 to the passenger side and have it all connected in the middle of the car it should still be super fu1king loud anyway i run them

 

[Bronco Boy]

That pic must be generic, cuz the big trumpet is not 22" long. I'd look for shorter trumpets for our cars, maybe 10"-15" max.

I had a single 10" in my Bronco.....

And FYI, a 5 gallon tank is WAY overkill for horns. 1-2 gallon is more than sufficient.