• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Will these fit? RIMS

Unr3al

Unr3al

New member
Here is a link to some rims I found that i like. 17x7 Maxxim Ahead (Graphite) Wheels/Rims
If link wont open specs are:
SIZE 17x7
ET 42 (offset?)
PCD 114.3 (obviously bolt pattern, I know GP's have a 5 x 115 but seems to be general consensus that this size works)
HUB 73.1 (hub size is larger then GP hubs will this be a issue?)

Thanks for the replies:th_thumbsup-wink:
 


They will fit fine.

The hub part is something you need to look at though.

If the size is alot bigger than stock you'll want to order a set of hub centric rings to make of the difference.
 
70.3mm Is the hub size for our cars, so a 2.8 difference. Not sure if they make rings that small. Just as long as a tighten lug-nuts in a star pattern I should be ok I would think, or am I wrong?
 
You must log in or register to reply here.
Back
Top