• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

will i have problems with a vs cam if idont have a tune?

blueguy said:
Most of the time it won't trip it because it's such a small lift based cam.
Click to expand...

random misfires have nothing to do with lift. a 600 lift stock cam would run without the code setting.

If P0300 sets on you, it'll limit things and screw with how it runs.
Click to expand...

It doesnt "screw" with it, it just eliminates misfire detection. Sometimes it may eliminate knock detection.

There is no breakin required, your motor is only going to last a few hundered miles anyway, so i wouldnt waste the time getting it "tuned".
 


Your always so negative ^. Why not back up your negativity. Say because of X, Y will happen. Then they can figure out how to fix or beef it up.
 
darkhorizon said:
random misfires have nothing to do with lift. a 600 lift stock cam would run without the code setting.



It doesnt "screw" with it, it just eliminates misfire detection. Sometimes it may eliminate knock detection.

There is no breakin required, your motor is only going to last a few hundered miles anyway, so i wouldnt waste the time getting it "tuned".
Click to expand...

ya thanks alot... tell me how my motor is only going to last a few hundred miles if you know so much.
 
You must log in or register to reply here.
Back
Top