• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Will I get major knock?

im a she...but anyways. I thought I was getting knock but after looking my intake seal was lose and I guess I was getting air being pulled in it that was causing it to brake up. Not sure but I fixed it and havent had a problem yet. Bio, I was thinking the same thing you was...with cam and headers the 3.4 should beable to breath VERY well. But I wasent wanting to drop that far with NO tune what so ever! So I picked up a 3.6 Im going to put the headers on and basic mods and run it and see what the aeroscan gauge says. But thanks guys for ALL the help and opinions!
 


DWosik13 said:
So question than im getting a VS installed as we speak what else would be necessary to drop the pulley cause this is something i have never heard about i mean besides a down pipe but with my set up and a downpipe and a ported manifold chances are i would be good with minimal to no knock?
Click to expand...

you should be fine to drop in the 3.4 area at least. with a tune id expect more. add some headers and youre well on your way to a 3.1 ish.

Jess3103 said:
im a she...but anyways. I thought I was getting knock but after looking my intake seal was lose and I guess I was getting air being pulled in it that was causing it to brake up. Not sure but I fixed it and havent had a problem yet. Bio, I was thinking the same thing you was...with cam and headers the 3.4 should beable to breath VERY well. But I wasent wanting to drop that far with NO tune what so ever! So I picked up a 3.6 Im going to put the headers on and basic mods and run it and see what the aeroscan gauge says. But thanks guys for ALL the help and opinions!
Click to expand...

i would have just gotten the 3.4, but i am a risk taker. i would still try and see what is out there for tuning options for you though. an untuned car generally doesnt run all that well after you put a cam in it because the air flow characteristics are usually way off from before. it wont knock, but it wont be as fast as it could be by any means. id expect to pick up a half second with a tuned vs untuned car.
 
t24moore said:
Stop right in your tracks. Why even continue modding and you cannot get a tune? A tune is THE MOST IMPORTANT MOD. You can buy all the best parts but your car will still run like balls if you cannot tune it. HA HA your piston is going to be IN YOUR BACK SEAT!!!!!
Click to expand...

Thanks t24moore, Ive been looking all over for it!
 
You must log in or register to reply here.
Back
Top