• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Will a 05-06 ls4 work in a 07

C

chevymudnut20001

New member
I picked up a 07 gxp with a bad engine. If I came across a 05-06 for cheap can I swap? Or what needs to b changed?

Sent from my XT1254 using Tapatalk
 


you would need a 58x to 24xconversion moulde from linglenfelter for the crank sensor and same deal with the cam pick up sensor. unless you physically swap cam gear and crank shaft. otherwise its striaght forward
 
I mean **** why not just replace the bearing and call it a day, update the oil pan gasket while youre in there
 


Possaibly could do that.. I was just wondering about the swap. The bone yard I go to. Did have a smashed gxp there. Hard front hit. Not sure if its still there yet. Also I could get it cheap.

Sent from my XT1254 using Tapatalk
 
Too much work to make an 05-06 work. Ideally you'd need to do what I did in my 06 Trailblazer and my LS3 engine which is remove the crank, have the engine shop press off the old crank reluctor wheel, buy the alignment tool from I forget where for $100, press on the 07+ reluctor wheel, and reinstall the crank. Then you need to swap the cam gear to the 4x pickup. If you have two engines, just have the one engine rebuilt, is my advice
 


LOL, I found one for 650. With 129,000 on it. Thinking of grabing that. Then maybe get one of the junk ones built.

Sent from my XT1254 using Tapatalk
 
You must log in or register to reply here.
Back
Top