Who is running PRJ Wires with a L67?

[Blown97]

I ask because I am interested in getting a set, but I have heard that there are issues with length and routing. If any one who has a pic of these wires on their L67 please post them. thanks folks :th_thumbsup-wink:

 

[Sabrewings]

A few pics from Impalas:

Or, same one as above, but under the mount and under the blower:

I have yet to see anyone complain about their length. I find them to be more than long enough with plenty of wiggle room to get them how you want them.

 

[justwhisen]

wow didnt realise how much wiring is under the hood until I saw that pic.
I know I have one of these but it all kinda blends in.

 

[blowfishRus6]

plenty of room here.

 

[Smokin2000gtp]

No length issues here.

Definitely get some, you won't regret it.

 

[Street Wolf]

Best wires on the market.

 

[Toofastgs]

I had no problems

 

[Blown97]

Awesome, thanks folks!! I am going to get a set.

 

[black.gtp]

Look they with stand fires I was at PRJ getting my trans looked at and the Pressure gauge blew a fitting and spray the engine with tras fluid and caught fire melted fuel lines all vac lines wiring and etc.. but the wired were ok

 

[jims05ss]

Sabrewings showed a pic of mine at the top of the thread with the wires routed under the blower but I changed them to this: (Oops; I didn't see the one where he had posted this pic also already - it didn't load the first time I read the thread!)

BTW, I do think the wires going to #3 & #5 could be a tad longer ideally.

 

[Smokin2000gtp]

Ya #'s 3 and 5 are somewhat short, but they still reach no problem.

 

[Sabrewings]

Sabrewings showed a pic of mine at the top of the thread with the wires routed under the blower but I changed them to this:

Yep, I posted both your pics for the comparison. They were easy to find since we just had this discussion not long ago. :th_laugh-lol2: