which wire is low beam
- Thread starter blakgtp
- Start date
Scottydoggs
Killa Bee
the cheep tester is like 2 or 3 bucks just stick the probe end into the socket when the low beams are on. keep testing the slots till it lights up.
Scottydoggs
Killa Bee
i love when i get the call from friends that their trailer wires got pulled out of the plug, and they cant make the trailer lights work, i show up with a 3 dollar test light and make it work.
stealthee
New member
Thats like something I did years back.
In 3000GT/Stealths people like to upgrade from the 1st generation front to the 2nd generation front. Its some basic body part swaps and some cutting and welding in the headlight bucket area. Other than that a quick wiring job to swap headlight harnesses.
Well when I first joined that forum in 03 people could not figure out how to make the swapped cars headlights work like a stock 94-99. See on the 94-99 low beams stay on when you switch to high beam. The way people were wiring it, the low beam would switch off. So in 04 I had a 92 here that I was 2nd gen swapping because of a wreck it was in. It took me literally FIVE minutes to figure out what everyone's issue was. All it took was a simple added ground wire.
I posted up a schematic of what I did, and people thought I was some kind of electrical god. Funny thing was I was a relative newb to electrical, and really still am.
In 3000GT/Stealths people like to upgrade from the 1st generation front to the 2nd generation front. Its some basic body part swaps and some cutting and welding in the headlight bucket area. Other than that a quick wiring job to swap headlight harnesses.
Well when I first joined that forum in 03 people could not figure out how to make the swapped cars headlights work like a stock 94-99. See on the 94-99 low beams stay on when you switch to high beam. The way people were wiring it, the low beam would switch off. So in 04 I had a 92 here that I was 2nd gen swapping because of a wreck it was in. It took me literally FIVE minutes to figure out what everyone's issue was. All it took was a simple added ground wire.
I posted up a schematic of what I did, and people thought I was some kind of electrical god. Funny thing was I was a relative newb to electrical, and really still am.
BillBoost37
New member
An on the spot test light is a side marker bulb. It's got leads you can straighten ...use to test,...fold back over and put back into the light socket.
Just sayin... Me and MacGyver are good buddies.
Just sayin... Me and MacGyver are good buddies.