• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Where is the vacuum line??

Bigbm80

Bigbm80

New member
I am going to be putting seafoam in my car and I know 1/3 of the bottle goes if the vacuum line from the brake booster but I am unsure where that is located. Pictures would be great so i can see exactly where it is. I have also read that you can put it in the intake, I assume they mean the air intake, and I am unsure if that is such a good idea because I can easily do that because i can just take the filter off my cold air intake and pour it in that way.And if I do pour it in my intake than should I do it while its running? please help anyway you can thanks!
 


the vacuum line i used was the one coming out of the bottom of the brake booster (big black round thing on driver side firewall) just take the line off the booster and pour the seafoam in while the car's running. when you're at about 1/2 a can, stop pouring and let the car stall out. Put the vac line back on the booster. Then pour the other half of the can in the gas tank. Wait for 20minutes or so and then fire it up again (might crank a bit hard but don't worry its normal) wait for most of the smoke to clear out of the exhaust, then go and drive the piss out of it for 5-10 minutes. Done.
 
leave the car run. and pull the line coming out of the brake booster. its the black round thing behind the master cylinder. easy way to put it is, its right in front of the steering wheel on the other side of the firewall. there will be a line on it. pull it out. car will start to run like crap, then you just stick in in the seafoam can and let it stuck it out.
 
You must log in or register to reply here.
Back
Top