Where do I get S/C grease?

[SDGTP99]

What the title says. I'm replacing the ported s/c on the car with a newer one. Need some grease first.

 

[a98gtp4u]

y u replacing the a ported s/c? u need the s/c oil? u get that at any gm dealer.

 

[SDGTP99]

Because the ported one was opened up far too much. The tip of the triangle was opened into a square. Take a look; http://www.cardomain.com/ride/3385930/3

I have a newer M90 but it had been sitting collecting dirt & dust. It had to be cleaned & the grease needs to be replenished. I've got some Oil I can get more from GM if I need it. Just need the grease more.

 

[a98gtp4u]

y is it less efficient with the opening that big if i may ask?

 

[silverstreak]

Because the ported one was opened up far too much. The tip of the triangle was opened into a square. Take a look; http://www.cardomain.com/ride/3385930/3

I have a newer M90 but it had been sitting collecting dirt & dust. It had to be cleaned & the grease needs to be replenished. I've got some Oil I can get more from GM if I need it. Just need the grease more.

Looks good

 

[SDGTP99]

The rotors have less to push on. It still pushes out around 7psi max on a 3.4" pulley.

 

[a98gtp4u]

oh ok. that is bad then cause i get 11 psi on my 3.4 and its not ported.

 

[SDGTP99]

Yup. I just need to find me some grease. . .

 

[TheOtherNick]

zzp has it

 

[SDGTP99]

zzp has it

Well dang I already bought some high-temp bearing grease.