• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Wheel sensor going bad again in new hub?

2

2004l67

New member
When I got this car I chased all kinds of ABS issues and finally got it all fixed. (New LF hub, and new RF harness)

One was a bad wheel speed sensor in the left front. About 1000 miles later I'm getting a C1225 LF wheel speed excessive variation.

Sounds like my new hub is a piece of crap, or try the wiring harness first? FWIW, it acts up most at low speeds and when turning.

I seem to recall every other time it was the harness, it caused a open or shorted sensor code.
 


its likely a wire broken/intermittent inside the sheath.....it might eventually get bad enough to trigger an open circuit code.... id start there
 
Probaly the wire... I installed a moog hub about 2 weeks ago and thought it was hub... Turns out it was a short in the wire.. You gotta trace it down..
 
Turns out it was the wire. At least both sides are new now. I suspected the hub since it had crappy reviews, but it was the only thing available at the time.
 


You must log in or register to reply here.
Back
Top