• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Whats the Best way to destroy an engine.......



when cash for clunkers was going on we would drain oil and put in a mix that would garuntee death, This was fun taking bets and such to how long they will run. ive seen cars drive 1/4 mile then die and some that die instantly
 
Put it on block go WOT with no oil or coolant like everyone was saying along with tossing in some small screws, try some M80's as well :th_sinister:
 


Want to make it go boom? ... Might have to settle for clank and clunk.

All you really need to consider is removing the rev limiters and stuffing it to the floor. Our motors don't like high rpm for extended periods of time.
 


:th_lightbulb:video is a must.... and my vote is that you crash it into a few trees, then throw small nuts down the intake :) and maybe a m80 would be nice on a long fuse stuffed in to the filler neck.... yes thats my vote... LET THERE BE BOOM :th_lightbulb::th_sinister:
 
Anything in the gas tank and it will just stall out, most likely without damaging anything in the engine other than maybe the fuel injectors. You really want to lock it up and possibly blow a rod out of the side of the block pull the break booster hose off and stick it in a gallon jug of water or something and blip the throttle a few times.
 


Promise to use your powers for good in a safe environment... like a remote start, or I won't mention that ammonium nitrate might do the trick.
 
BillBoost37 said:
Want to make it go boom? ... Might have to settle for clank and clunk.

All you really need to consider is removing the rev limiters and stuffing it to the floor. Our motors don't like high rpm for extended periods of time.
Click to expand...

Coming from someone that has removed the rev limiter... I can say that the rev limiter is the part that hurts high rpm operation not high rpms... You can easily throw a brick on the pedal at 7k for a good amount of time if you have the cooling.
 
You must log in or register to reply here.
Back
Top