What to Scan with torque

[Xorbex]

Sorry for my ignorance but other than knock im not sure what I should be keeping an eye on with the torque app. Also does anyone know if it can read boost pressure and if so whats it called in the app.

 

[chrsmi1]

Turbo boost, Coolant temp, Iat, Timing, Ltft, Stft. Those are the main ones.....

I do speed, and Hp and torque just for fun

 

[Scottydoggs]

i watch my ltft, stft on one page kr, and timing on another page.

another page i got intake temp, trans temp, coolant temp o2 voltage current gear. and volts.


the more stuff you have on one page the slower the gauges work. why i have only 2 per page on what i watch all the time.

 

[chrsmi1]

i watch my ltft, stft on one page kr, and timing on another page.

another page i got intake temp, trans temp, coolant temp o2 voltage current gear. and volts.


the more stuff you have on one page the slower the gauges work. why i have only 2 per page on what i watch all the time.

Rich as hell and that intake is nasty high. HA!

 

[Scottydoggs]

that was bone stock all around. parked on a hot ass day.

note the 158 intake temp lol

 

[Xorbex]

ill grab some screens tomorrow eve to show u what im getting

 

[bandook]

Same as above. If you include Chevy pid's you can also monitor cylinder misfire/history.

 

[coolone]

Remember the more pid's you add, the more the elm monitors from the pcm no transmits to your phone, possibly slowing it down. A page or two of the most necessary are all that's needed.

You wouldn't need to load misfires/history unless getting them... It would be a waste of resources.

as mentioned, temps, IAT, fuel, spark, KR, intake, rpm, vac/boost, maf, etc... What's nice is recording the runs and chrecking them too.