Warrantied out my battery. Yay a another brand new Optima with another 3 year warranty.
Thought those where supposed to last forever or something
Sent from the Milky Way
Torque Pro can monitor it and I have it set up through my head unit to show me.
Link to said head unit? Sounds awesome
Sent from my HTC One using Tapatalk
10 quarts included a quick flush, 8-8.5 quarts for dropping the pan and accumulator. I wonder if the issue is caused a drop in line pressure instead of just tcc pressure. You could get a pressure gauge hooked up to it, put it on the windshield and take it for a drive to see.Your thread said the job would use 10 quarts, and at that point I had only put 6 in, so I put 2 more in to bring it up to full again. I've driven it some more with only the oscillating problem, checking the fluid level after every drive and it's gone down a little, but it's still in the crosshatches. I made double sure to put the oil dam back in, and the little black dam thing down by the chains.
http://forum.xda-developers.com/showthread.php?t=2528349
On my transmission issue, I have noticed something else. When coasting in gear, my RPM will drop down to 500 rpm or lower, then come right back up to idle. This happens almost constantly after it warms up a bit. sitting still in gear, totally fine. Only when I'm moving. I've got a spare MAF and TPS I'm about to put on, we'll see if it does anything, but at this point it's a shot in the dark.
This one was my fault.. Had my wideband wired wrong and drained it and the parts stores around here don't have a strong enough charger to bring a low voltage optima back up to 12v so really all they can do is warranty it out. Fine by me new battery and another new warranty. Quality of them has went down but I haven't had much luck with duralast so I'll stick with them.
Optima actually makes a special charger specifically to bring back dead red tops. Anything else doesn't properly work.
I would paint the mounts and engine cover the same color and find some blue plug wires .
All I need to figure out now is how to get the compound and wax that got onto some of the porous black plastic (like the door handles, grill, and plastic on the bumpers) back off. I tried scrubbing it when I was washing and it didn't help. Might have to hit it with a brush or something.
I didn't get a finished pic, but I'll see if I can tomorrow. I hope to get to my car within the next few weeks.