• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

What did you do to your Car today?

Status
Not open for further replies.
Installed sd hood . Had a little trouble with the latch not closing all the way but it's done.

ra5y3a7a.jpg


Sent from my Galaxy S2 using Tapatalk
 


Cleaned out the inside for the first time in a while and gave her a bath.

Also for some reason I keep smelling burning rubber after a long drive all of a sudden.
 
Gave the 97 a Wash, Buff, Polish, Wax, Checked PSI, poured in some Lucas, Mothered the wheels, Wiped the seats and what not.
Proceeded to take it for a drive, destination to be the Rt 66 mother road car show stopping at Freddie's for a burger and shake.
Just before getting some nourishment, I heard a loud crash. It sounded like bottles breaking followed be a metal on metal clunk, coming from the pass side engine compartment. The motor still running, every thing sound normal. Moments later Battery light comes on. No check engine light. Shut it down, pop the hood, look toward the alternator, and no belt. I look closer and missing a tension pulley (the one with the hoses). Grabbed some food. Took her back to the garage. Lucky for me I have another sc 3800 at my garage I could score the part from. It only took 35 minutes and most of that was waiting for it to cool off so I could take the old parts off. Missed the car show today. Just got back from getting a pizza and it is raining. Thanks raindrops on fresh wax.
 


02NavyBlue said:
Were there any noises up until that point? Grinding or whining?
Click to expand...
Nothing just waiting in a line of cars not even moving. It fell out of the way of the sc belt and the main belt just had one little mark on the side. Not a bit of warning. I inspected the point of fracture and it looks like it was cracked 75% of the way around the shaft that holds the pulley. On the right is an Auto-zone replacement part broken. The Left one is my spare.
20130928_202000_zpsc5ce893f.jpg
 
Before the failure the white area next to the red mark was the only thing holding the pulley on.
20130928_202000a_zpsdb2614a6.jpg

The part I put on looks like an original with the correct pulley.
Its made in Canada so it should last a while.
 
Last edited:
DirtDog said:
o damn....was anything else damaged
Click to expand...
Nope. It fell off, the belt just hung there off to the side out of the way.
I am guessing the glass sound came from the spring hitting the fins on the inside of the housing and the clunk was the pulley and spring landing on the control arm. I was on a hill so a coasted into a parking spot after shutting it down.
DSC06291_zps7e48acb4.jpg

Shes up and running fine.
Almost forgot I put a LED in the license plate light.
 
Last edited:
stealthee said:
I showed two Hyundai's what speed was like. LOL

I ran to town to get a haircut and renew my driver's license. On the way home I see a Tibby and a Veloster playing games up ahead of me. I speed up a little to catch them. I slowed back down a little and the Veloster punched it and got way ahead and slowed down again. The Tibby drove onto the shoulder to pass another car so I said F#CK it and dropped the hammer and left them both in the rear view.
Click to expand...


bet the Tibby was like....


 


stealthee said:
I showed two Hyundai's what speed was like. LOL

I ran to town to get a haircut and renew my driver's license. On the way home I see a Tibby and a Veloster playing games up ahead of me. I speed up a little to catch them. I slowed back down a little and the Veloster punched it and got way ahead and slowed down again. The Tibby drove onto the shoulder to pass another car so I said F#CK it and dropped the hammer and left them both in the rear view.
Click to expand...

Nice

Sent from my Samsung Galaxy Note II
 


Got my buddy to give the GP an alignment.....

Alignment_2013_015.JPG


Alignment_2013_017.JPG




Was surrounded by RaceKar.....

Alignment_2013_009.JPG


Alignment_2013_001.JPG


Alignment_2013_008.JPG


Alignment_2013_003.JPG


Alignment_2013_011.JPG




Then went to another buddy's shop where we had lunch, then wired up some relays and circuit breakers on his Turbo Ranger project. Was a good day.
 
I tinted the windows, still have to do the back window. As soon as I give it a bath, I'll get a couple pics up. Also picked up a can of VHT to do the tailights
 
Cleaned it real good on the outside, popped the hood and checked to make sure everything is good, then threw in a fresh set of al605 plugs. Took it for a drive after and its nice to see how much of a difference 605s are to 104s did a 10mph roll and lit my tires up. Had to have been almost a 100ft strip of rubber i laid down like a boss.
 
Status
Not open for further replies.
Back
Top