Bronco Boy
Donating Users
Re: What did you do to your boat today? Vol 2.0
Fronts are 5.25".
Fronts are 5.25".
What did you do to your car today? Vol 2.0
- Thread starter Mad Monkey
- Start date
Re: What did you do to your boat today? Vol 2.0
Ahh. Great pics. Yeah, I read that you "could" get 6" in there but not w/o modification. I have this beautiful set of 6" Alpines I've had since I had my 2004 GTO (RIP) ready to be installed. I've been looking for the correct 5.2" size but damn, I got these here already.
I"ll have to get some pics of my progress so far. Anyone want to see the 15" sub box I'm working on installing? lol.
Ahh. Great pics. Yeah, I read that you "could" get 6" in there but not w/o modification. I have this beautiful set of 6" Alpines I've had since I had my 2004 GTO (RIP) ready to be installed. I've been looking for the correct 5.2" size but damn, I got these here already.
I"ll have to get some pics of my progress so far. Anyone want to see the 15" sub box I'm working on installing? lol.
Attachments
Bronco Boy
Donating Users
Re: What did you do to your boat today? Vol 2.0
I thought I read way back that the 6" only needed minor modifications to fit. I say do it if you have the speakers. I had the 5.25's laying around, so they went in.
Always enjoy pics and projects. Post 'em up.
CHI2000GTP
New member
Re: What did you do to your boat today? Vol 2.0
Appears that links aren't working either. They are Nazis over there. Holy cow. Here is what I get when I click on those links:
Appears that links aren't working either. They are Nazis over there. Holy cow. Here is what I get when I click on those links:
green97
New member
Re: What did you do to your boat today? Vol 2.0
My 97 had 6" in the front. I went to replace them with new and ordered 5.25" according to factory specs without pulling door panels and since I already had them that is what went back in. I didn't take note of mods. If there were any it was minimal.
I thought I read way back that the 6" only needed minor modifications to fit. I say do it if you have the speakers. I had the 5.25's laying around, so they went in.
Always enjoy pics and projects. Post 'em up.
My 97 had 6" in the front. I went to replace them with new and ordered 5.25" according to factory specs without pulling door panels and since I already had them that is what went back in. I didn't take note of mods. If there were any it was minimal.
spazzz
New member
Re: What did you do to your boat today? Vol 2.0
Right click the logo and hit 'open image in new tab'
Appears that links aren't working either. They are Nazis over there. Holy cow. Here is what I get when I click on those links:
Right click the logo and hit 'open image in new tab'
Bronco Boy
Donating Users
spazzz
New member
Re: What did you do to your boat today? Vol 2.0
Once you hit Scottys link it goes to Facebook and that 3rd party things shows up? Right click the logo thing, because there is no picture, with open image in new tab.
Sumbtch it has worked for me on any defunct picture from anywhere if it doesn't pop up right away.
Once you hit Scottys link it goes to Facebook and that 3rd party things shows up? Right click the logo thing, because there is no picture, with open image in new tab.
Sumbtch it has worked for me on any defunct picture from anywhere if it doesn't pop up right away.
Bronco Boy
Donating Users
Re: What did you do to your boat today? Vol 2.0
When I open it, it takes me to http://www.supermotors.net/getfile/1116616/fullsize/untitled.jpg, and all I see is the same image as CHI2000GT his post. Nothing to click on it at all.
spazzz
New member
Re: What did you do to your boat today? Vol 2.0
Well it shouldn't be going to supermotors.
CHI is using supermotors now too, so it must be something with the settings making supermotors your image viewer.
Well it shouldn't be going to supermotors.
CHI is using supermotors now too, so it must be something with the settings making supermotors your image viewer.
Below Average Joe
New member
Re: What did you do to your boat today? Vol 2.0
When I right click on the imagine and open it in a new window, it works for me. My 2 cents.
When I right click on the imagine and open it in a new window, it works for me. My 2 cents.
spazzz
New member
Re: What did you do to your boat today? Vol 2.0
OK so I was going to get some burr bits and a die grinder but my compressor is a pussay.
So I bought these Dremel tungsten carbide burrs for a whoppin $14. Turns that little fcker into an animal.
https://www.amazon.com/gp/product/B00JL4F1SM/ref=ox_sc_act_title_2?smid=A1YJ62E4AIME7X&psc=1
All I needed was one bit to get 2 degrees on the passenger rear and 1.5 on the drivers side.
Slotted the top and used this Android spirit level to figure out the difference from last weeks alignment.
OK so I was going to get some burr bits and a die grinder but my compressor is a pussay.
So I bought these Dremel tungsten carbide burrs for a whoppin $14. Turns that little fcker into an animal.
https://www.amazon.com/gp/product/B00JL4F1SM/ref=ox_sc_act_title_2?smid=A1YJ62E4AIME7X&psc=1
All I needed was one bit to get 2 degrees on the passenger rear and 1.5 on the drivers side.
Slotted the top and used this Android spirit level to figure out the difference from last weeks alignment.
idrivejunk
Active member
Re: What did you do to your boat today? Vol 2.0
Thats pretty nifty. Is your compressor tight or is it like tossing a hotdog down a hallway? Heckuva bunch of burrs you got for the price. I used a Dremel on mine too, but like a $4 4pc set. Amazing how much a nice sharp burr can do.
I haven't noticed any more hot flashes with my GTP, its doing good. Done some blog updates lately though, for them that like old fixed junk-
https://chevroldsmobuiac.blogspot.com/
OK so I was going to get some burr bits and a die grinder but my compressor is a pussay.
So I bought these Dremel tungsten carbide burrs for a whoppin $14. Turns that little fcker into an animal.
https://www.amazon.com/gp/product/B00JL4F1SM/ref=ox_sc_act_title_2?smid=A1YJ62E4AIME7X&psc=1
All I needed was one bit to get 2 degrees on the passenger rear and 1.5 on the drivers side.
Slotted the top and used this Android spirit level to figure out the difference from last weeks alignment.
Thats pretty nifty. Is your compressor tight or is it like tossing a hotdog down a hallway? Heckuva bunch of burrs you got for the price. I used a Dremel on mine too, but like a $4 4pc set. Amazing how much a nice sharp burr can do.
I haven't noticed any more hot flashes with my GTP, its doing good. Done some blog updates lately though, for them that like old fixed junk-
https://chevroldsmobuiac.blogspot.com/
Scottydoggs
Killa Bee
Re: What did you do to your boat today? Vol 2.0
i give it 3 days, then loud again lol
is that a tomato soup can? lol we used to use coffee cans back in the day, cause they were super thick, and then hose clamp it on there lol
i give it 3 days, then loud again lol
is that a tomato soup can? lol we used to use coffee cans back in the day, cause they were super thick, and then hose clamp it on there lol
Re: What did you do to your boat today? Vol 2.0
Maybe. It is a diced tomato can thickest I could find. Some mesh and putty under the can and then wait a day and puttied up the rest of the seam. We will see how long it lasts. Got 5 bucks into it.
I would take that 90 dollar system in Spokane if someone wanted to deliver it to Minnesota.
Sent from my iPhone using Tapatalk
Maybe. It is a diced tomato can thickest I could find. Some mesh and putty under the can and then wait a day and puttied up the rest of the seam. We will see how long it lasts. Got 5 bucks into it.
I would take that 90 dollar system in Spokane if someone wanted to deliver it to Minnesota.
Sent from my iPhone using Tapatalk
Scottydoggs
Killa Bee
Re: What did you do to your boat today? Vol 2.0
you can get a whole new cat back for 300 shipped off ebay. i got a stock replacement off there, its nice and quiet. the way i like it.
like a so... http://www.ebay.com/itm/1997-2002-G...264450?hash=item27f782bb02:g:ZsAAAOSwnHZYQY-U
thats the same place i got mine from.
you can get a whole new cat back for 300 shipped off ebay. i got a stock replacement off there, its nice and quiet. the way i like it.
like a so... http://www.ebay.com/itm/1997-2002-G...264450?hash=item27f782bb02:g:ZsAAAOSwnHZYQY-U
thats the same place i got mine from.