• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

What did you do to your car today? Vol 2.0

Re: What did you do to your boat today? Vol 2.0

Got some new tires (Cooper Ultra Touring) put on at Tires Plus.
Now one of my TSWs has a spot that looks like curb rash. Fckers,Fckers Fck Fck FCK
 


Re: What did you do to your boat today? Vol 2.0

Ordered KYB GR2's and Moog mounts, and then bought go-kart parts instead of the SSC springs I was planning on getting...

Priorities. lol
 
Re: What did you do to your boat today? Vol 2.0

Watched the GP roll 403K and it has developed a clunk in the drivers floorboard area when coming to a stop. Suspect subframe and trans/engine mounts. Guess that's next on the list. Along with some anti-pogo washers. At this point the subframe mounts are pretty much the last OE bushings left so why not, and the mounts are def. toast as when I replaced my A/C condenser I was able to pull the motor forward by hand and hold it there in order to get the dogbone mounts off/on.

Just finished washing the Vic. Even now it's still 86* outside. Figured I'd go ahead and knock off all the stupid orange pollen from my tree out front so the car doesn't look like shyte.
 
Re: What did you do to your boat today? Vol 2.0

Plugs, wires and coils replaced today. Power cable and zzp voltage booster as well.
08e9d158e2b494ed9874159ae315a9d5.jpg


Sent from my SM-G900V using Tapatalk
 
Re: What did you do to your boat today? Vol 2.0

What part # were the Taylor wires? I am due and they look nice.

Also, I had a voltage booster and it killed my battery. Just something to keep in mind.
http://chrisb.users.superford.org/Grand_Prix/Projects/Voltage_Booster/Voltage_Booster.html
Taylor Cable 72210 Spiro-Pro Red Spark Plug Wire Set https://www.amazon.com/dp/B000CQ005C/ref=cm_sw_r_cp_apa_6mNCzbB046B9D

I don't care for the voltage booster but the added cable seems fine.

Sent from my SM-G900V using Tapatalk
 


Re: What did you do to your boat today? Vol 2.0

Went to change the T-stat since Ole Betty had been heating up at idle and when coasting down hills.... I'd have to shift to neutral and rev it or shift down into a lower gear-anything to get rpms up and force it to open the damn T-stat.

Anyway, went to go ahead and get started for my quick 20 minute thermostat switch.... and what to I find? Not just orange... but orange and green yaaaay

fast forward flushing the whole damn system with a garden hose. t stat is now in with new dex, no overheating issues and im done for the day....
 
Re: What did you do to your boat today? Vol 2.0

Went to change the T-stat since Ole Betty had been heating up at idle and when coasting down hills.... I'd have to shift to neutral and rev it or shift down into a lower gear-anything to get rpms up and force it to open the damn T-stat.

Anyway, went to go ahead and get started for my quick 20 minute thermostat switch.... and what to I find? Not just orange... but orange and green yaaaay

fast forward flushing the whole damn system with a garden hose. t stat is now in with new dex, no overheating issues and im done for the day....

how could it be orange and green? Like it switched colors on you?
 
Re: What did you do to your boat today? Vol 2.0

how could it be orange and green? Like it switched colors on you?

YES ACTUALLY! The bottom of the overflow was basically sealed with junk, but the top was just green...
So that was green and everything from within the engine was that glorious gross gray it turns when they're mixed.

I'm assuming somebody topped off the overflow either to attempt to fix the cooling issue, or to fool the next buyer aka me...

All is well now though
 
Re: What did you do to your boat today? Vol 2.0

Last week I replaced my spark plugs and finally dropped to the 3.25" pulley that I bought last year. Then I drove it on a 1,500 mile roadtrip through Minnesota, Wisconsin, Chicago, Michigan, and the UP.
 


Re: What did you do to your boat today? Vol 2.0

Well I see some rain in the forecast so today was a good day for washing, polishing & waxing the car.
Cleaned/shined the tires & wheels, Windex & a little RainX on the windows.
GoldieRocks is lookin' good!
 
Re: What did you do to your boat today? Vol 2.0

LOL, doesn't seem like it ever ended. Plenty of attempts to draw a distinction between themselves and the mitten - road signs, restaurant names, bumper stickers, random conversation...
 


Re: What did you do to your boat today? Vol 2.0

Put new front pads (acdelco ceramic) and rotors last night on the 08. Feel great compared to the worn out pulsing pads and rotors that I was trying to run down to nothing.

I have always had the inner pad wear out a bit quicker than the outer pad on most cars. for some reason they like to install the pad with the squeaker on the outside. I put the new ones on the inside.


Sent from my iPhone using Tapatalk
 
Re: What did you do to your boat today? Vol 2.0

Over the last few weekends. I've added an aftermarket stereo deck w/a USB port so I can play music off a jump drive. Love it. I added some Alpine Type R 6x9's in the back deck, I will be adding Type R 6's in front doors. They are running off a Hifonics 70W X 4. Sounds pretty good so far. This is in my GT.
 
Re: What did you do to your boat today? Vol 2.0

Over the last few weekends. I've added an aftermarket stereo deck w/a USB port so I can play music off a jump drive. Love it. I added some Alpine Type R 6x9's in the back deck, I will be adding Type R 6's in front doors. They are running off a Hifonics 70W X 4. Sounds pretty good so far. This is in my GT.

pretty sure the front doors are 5 1/4, anything larger and you need to mod the hole they live in. seen pics, dont seem all that bad, but if you looking to just swap em in there. do the right size.
 
Re: What did you do to your boat today? Vol 2.0

the dumb petcock on my fmhe was leaking out its turn screw, so i had to cut its drain nipple off so it would spin past the bar i got holding the fmhe in place, then installed a plug.

http://s1097.photobucket.com/user/scottydoggs/media/002_zpsb9rziouz.jpg.html?sort=3&o=1

new plug installed. http://s1097.photobucket.com/user/scottydoggs/media/001_zpsubo6o7qr.jpg.html?sort=3&o=0

not embedding pics sucks. links are the one thing we know still works.

ps: i lost damn near a gallon of coolant too taking that dumb thing off.
 
Back
Top