• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

What did you do to your car today? Vol 2.0



Re: What did you do to your Car today? Vol 2.0

LED fogs are done....


LED_Fog_Lights_120.JPG


LED_Fog_Lights_130.JPG


LED_Fog_Lights_140.JPG



The left side "levelness" isn't as bad as I thought; maybe a degree or 2 out. Gotta admit, they are growing on me. At this point I will leave them on the car. Considering a spacer to push the factory mount forward an inch or two.
 
Re: What did you do to your Car today? Vol 2.0

Not today (past Saturday) pulled engine and tranny from parts car : )
 
Re: What did you do to your Car today? Vol 2.0

Nooo give to meee

What did you do just glue them to some stock fogs lol

Sent from my SM-S902L using Tapatalk
 
Re: What did you do to your Car today? Vol 2.0

:th_thumbsup-double::th_thumbsup-double:FedEx guy came with some gifts for the GXP. (Dog not included lol)

 
Re: What did you do to your Car today? Vol 2.0

Made a template for front STB brackets... I don't like drilling holes when I don't have to, and maybe I can make a few extra and spread the love. Lol



I'm thinking 3/16th inch steel, with studs on the inside for the braces to just drop onto.
Lol. These came in today. Already installed.
af23f49fc803586fb2722a2c22088ddb.jpg
9ae7e1cb61e79c40c70817a7aab131bd.jpg



Sent from my S208 using Tapatalk
 


Re: What did you do to your Car today? Vol 2.0

wasted my time doing this damn fan swap. car hit 200 on the road moving, (thats normal) but then i parked and it quickly rose to 222 and climbing.

i did also get the tranny cooler mounted, still need to run the lines tho.
 
Re: What did you do to your Car today? Vol 2.0

wasted my time doing this damn fan swap. car hit 200 on the road moving, (thats normal) but then i parked and it quickly rose to 222 and climbing.

i did also get the tranny cooler mounted, still need to run the lines tho.

did we talk about this before? i swapped to a new rad and the temps went back to normal AND this is was after i fixed my wiring harness to the fans/ the high lead kept burning up and therefore i had no extra fan power

maybe your fans are just crapping out and are weak
 
Re: What did you do to your Car today? Vol 2.0

Made a template for front STB brackets... I don't like drilling holes when I don't have to, and maybe I can make a few extra and spread the love. Lol



I'm thinking 3/16th inch steel, with studs on the inside for the braces to just drop onto.

i have these and they are made out of aluminum works perfect and cheap
 
Re: What did you do to your Car today? Vol 2.0

i just replaced them with after market crap. and it ran hot, wasn't really hot with the old fans. so i get to put them back on tomorrow.
 


Re: What did you do to your Car today? Vol 2.0

i just replaced them with after market crap. and it ran hot, wasn't really hot with the old fans. so i get to put them back on tomorrow.

Its pretty much been proven time and again aftermarket fans don't cool near as well as stock. I've seen it across many platforms.
 


Re: What did you do to your Car today? Vol 2.0

Its pretty much been proven time and again aftermarket fans don't cool near as well as stock. I've seen it across many platforms.


years back on my 03 gmc the clutch fan was failing for th e3 rd time and the warranty was up. so i took the clutch fan off and installed two 16 pro comp fans. truck ran a degree cooler and the a/c was never as cold.

these did not live up to that pair of fans at all lol.
 
Re: What did you do to your Car today? Vol 2.0

My question is why do it on the car when it takes one bolt to take them out?

This...
Would of taken you more time to tape and clean the bumper up afterwards then it would of been just to pull the tab of


Sent from my iPhone using Tapatalk
 
Back
Top