• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

wat do i need to do

lilrocket

lilrocket

New member
ok i have a dhp pcm and i just found my 42lb injectors wat do i need to do to put them in as fare as my tune goes im at a speed bump here, do i put the in and go or do i have to send my pcm off again :(
 


Unless you can tune...then yes you will. Why do you need 42lb injectors? Are your IPW's maxed?
 
mm shouldnt be but they i was told the stockers max out with any pulley under like the 3.2 and im running the 3.2 with no kr now so i wonted to try out the 3.0 this weekend just rather b safe then sorry. any help is grate tell me more :)
 
im a cheap bastard lmoa:D i would like to have hp tuner i just cant brake down to spend that much on one :( i have a friend who has it thats pretty cool that could tweak it for me i just wasn't 100% sure i needed to
 
You 100% need to scale the injector tables for the 42s and he cant rewrite a dhp pcm with out starting from scratch.
 


so i was told by john with intense damnn guess ill just order a intense pcm anyway im not sure if i need the injectors in or not but i just know everyone says you cant runa 3.0 or watever with stock injectors idk my cars weird runs strong as hell but the mods i have count i guess :D
 
you should also get a pump rewire. no Knock doesnt always mean your cars running good or well. You can run what ever pulley you want. But when a piston objects the money you saved on mods kinda becomes mute. Also when your at the track running low 14's on a 3.0 pulley. It kinda becomes Mute aswell
 
Last edited:
i have that (Venturi Specific Walbro Fuel Pump w/harness, via INTENSE) im waiting to the week end to c how it runs then i have a couple new pics and mod list to post up blow some minds as fare as money spend power gained :)
 
Like I said, Just because you have no Knock that really doesnt mean you should or could run a smaller pulley. What valvetrain mods or intercooler do you have. Whats your AFR? whats your Timing wot?
 
mmmm secret valvetrain mods they experimental :) AFR is around 11.7 the last time i checked it with wide band, which i guess will go back on since my bike needs it no more, timing at wot i have no clue let you know by the week end just ordered the aerofroce gauge
 


You'll probably need larger injectors with a 3.0. Scan your IPW first, I believe the max you'll get is around 19.5 at 6k rpm. If you're near 19, then yes you need injectors for sure.

Have you tried to read/write your .bin with HP tuner? You can get the injector tables scaled very easily with a tuner.
 


You must log in or register to reply here.
Back
Top