• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

VHT wrinkle black blower casing

Lsick7

Tofu Delivery Boy
I got bored and went to work on my spare blower casing. Cleaned it to the best of my ability, roughed up the surface a bit, taped it off and went to town. I did three heavy coats one vertical, one horizontal, and a diagonal coat. Waited a couple minutes in between. It goes on thick but adheres very well and left me no runs. After the final coat I went to town with the blow dryer. Any form of heat I read rapidly accelerates drying time. A lot of people complain of taking days to dry. But I seriously sat there for a little over an hour blow drying. It's amazing you can watch it wrinkle right in front of your eyes. I'm very happy with the results

Immediately after the final coat

40d9e48a.jpg


Half hour through drying

32f2cff3.jpg


45 mins

b522313a.jpg


Done!

78c0e955.jpg


Dry to the touch, but ill let it cure for a few days for good measure.
 






Back
Top