Valvetrain Questions

[Bedwards]

Hey guys. I'm going to be putting together my L26 ported and polished heads pretty soon. I am going to be running 1.95 Roller Rockers. I have decided to get L76 valve springs and retainers. As for valve seals and valve locks, do I use the L26 ones, or the L76 ones? Or will the ones off ZZP's website work fine? Thank you.

 

[TheOtherNick]

Ones off of zzp site will be fine. You just need to get some good viton valve seals for your 3800 head.

 

[Bedwards]

Ones off of zzp site will be fine. You just need to get some good viton valve seals for your 3800 head.

The seals on ZZP's site are the proper Viton valve seals, correct?

https://www.zzperformance.com/grand_prix/products1.php?id=125&catid=104

 

[TheOtherNick]

Yup Thats what I have on mine.

 

[Bedwards]

Yup Thats what I have on mine.

Thank you, sir.

 

[TheOtherNick]

no problem

 

[Bio248]

why are we putting L26 heads on a L32/L67? where are your injectors going?

 

[Scimmia]

why are we putting L26 heads on a L32/L67? where are your injectors going?

According to his profile, he's running the SSM90 kit, so I'm assuming the injectors are in the LIM.

 

[Bio248]

...reading is better than i.

fill out your signature, guy!

 

[Bedwards]

According to his profile, he's running the SSM90 kit, so I'm assuming the injectors are in the LIM.

Correct.

 

[Bedwards]

...reading is better than i.

fill out your signature, guy!

Happy? Haha.

 

[Bio248]

yes.