• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Vacuum Lines on gen 3

Beelzeboul

Beelzeboul

New member
IMG_20120803_133232.jpg


original

vacuumlines.jpg


paint shop

so the white lines are how I believe I run the lines just wanted to make sure I had this right before I ran and grabbed the lines
 


he has the 97 sc, he has a vac tree on the front side of the charger beside the bbv
 

Attachments

  • GTP Vac Chart.jpg
    GTP Vac Chart.jpg
    61.6 KB · Views: 15
I dont have to use that vac tree do I i noticed it came on the sc I got from bio but my old one didn't figured it was just deletable
 


my car is a 97 with a 98-03 SC in it, i have the lines routed for the 98+ so, if you can cap that hole, then im sure you will be fine.

here is the routes for 98+

 
so the whole that the vac tree sits in that isnt on there needs to be filled or capped?
could I just loop a line from each output on it?
 
what do you mean loop a line from each output? to answer your other question, yes it needs to be blocked off, or your will have a large vacuum leak.
 
He is talking about taking a vac line from the top port to the bottom one. Yes you could "loop" it. That would work.
 


You must log in or register to reply here.
Back
Top