• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

vacuum leak?

H

hollas13

New member
I have seen on a couple of threads (cant seem to find them now) that your vacuum at idle should be around -20 -21. Is this correct? Im running 1.9rockers, headers, 3.4 pulley, zzp tune, al103's, 180tstat and fwi and only seeing around -10 at idle. 98gtp. Im still getting kr but its not consistant. one day it will be under .5* next day it will be around 3*. When im scanning im doing this at op temp. Just trying to figure out if theres a leak causing me to run lean. thanks in advance
 


Hollas did you get your lean condition resolved?

I have one right now. Seeing 16+ LTFT super lean at idle. I have an xp cam and I see about -7.5PSI vacuum at idle. When i convert this to in/Hg i get about -15.

What should my vacuum be at idle with an XP cam?

Thank you
 
You must log in or register to reply here.
Back
Top