• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Unplugging injector wires?

T

Teancum

New member
I've never had to do it on a GM vehicle -- the plugs have this little blue clip in the middle. How do we get them off?
 


Its simple, there is a metal clip roughly in the shape of a U that you have to push. When you push the clip you will see the sides of the clip move out and then the clip pulls off at the angle it attaches to the injector. The metal clips are not perfect and sometimes get stuck. A few of mine were stubborn and the metal clips took a decent amount of force to compress. Be careful if you break a injector you'll have to remove the fuel rail and install a new one. Dealer price $155 each.
 
Teancum said:
No -- I'm talking about the electrical control wires, not the injectors themselves.
Click to expand...

if you look at it you should be able to see the other end of the blue clip, sqeeeze it with fingers or needle nose and pull it out, then you just unclip it and pull the plug out
 
You must log in or register to reply here.
Back
Top