• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Turbo Project- Posting throughout the entire build

Loftus1995

Loftus1995

New member
I have more photos yet can't add them any ideas? Ive seen threads with more than two photos haha.


I am putting a Turbo into my 2000 Grand Prix, it was my first car and is in pretty rough shape. I hope to get it to an 11 second car if possible, watch the pictures as I attempt to get there.

~~Mods going into the car~~
Stattama T67 Turbo kit
E85 Fuel Pump
65# Fuel Injectors
15# Bottle of Nitrous, proton plus shots going from 35-250hp. (possible)


Still deciding on other modifications and best way to do them which are mostly the heads, springs, timing chain etc.
FB_IMG_1422493140503.jpg

Snapchat--461191425602058363.jpg

10462495_10204676768452618_6811298980851529451_n.jpg

10941448_10204676769132635_1299414424990822735_n.jpg

10945608_10204678988548119_6513938881617352786_n.jpg

10920941_10204679479840401_6352355449262775817_n.jpg

13586_10204679312236211_499348415356708811_n.jpg
 

Attachments

  • FB_IMG_1422493140503.jpg
    FB_IMG_1422493140503.jpg
    51.6 KB · Views: 29
  • Snapchat--461191425602058363.jpg
    Snapchat--461191425602058363.jpg
    75.8 KB · Views: 30
Last edited:


Yes I plan to get a trans built as well. This isn't going to be a cheap hobby found that out even after buying a pillar and gauges haha.
 
Just put links up instead? I used the "Insert Image" Button but only allowed me to have two photos. Ill just do the direct button.
 


Its a wet kit, I got the injectors with a kit I bought with the turbo so it wasn't to bad, if they dont perform high enough I will upgrade to the 80#s
 
If it's wet the injector size should be adequate, your biggest obstacle is f the pressure drop while using the nitrous off the fuel rail. Upgrade your pump to something adequate for boost and nitrous
 


That's 320lph i would test it out on boost, install a fuel pressure gauge and check for drop off at wot. start off on n20 with a small 50 shot. And go up till you see your fuel pressure drops
 
Thanks ill look into it! Hopefully I can get most of this done soon. The track opens in May and I would like to have it fully tuned before that, I highly doubt it but the chances are there.
 
There's actually a thread on how to make a 450lph pump work In stock canister that snowflake made. That's what I'm running and its a stout setup.
 
Ok I have gotten a little ways just haven't gotten far enough for an actual update. I do have a few questions for you guys though
I went with the ST5 cam and it says on the ZZP website with recommended things, one is the lifters. Should I go with the OER lifters or LS7? If you could please kind of back it up. With the lifters being upgraded should i upgrade the rockers as well? They say stock or 1.6 would be the best, if I can get the same performance on stock I won't spend the extra money.
Also on their website they recommend titanium retainers yet they only sell steel, does SummitRacing sell the retainers, are they specific to the engine or just piston size?
 


You must log in or register to reply here.
Back
Top