• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Turbo build plans!

W

wannabegtp

New member
Hey guys i have a 2002 pontiac grand prix gt coupe. It is bone stock!
I plan on turboing it. here is the list(in order) of everything i plan on doing. Please leave suggestions!

  1. Visual mods(tint, bumper inlays, lowering springs, etc)
  2. hv3
  3. poly bushings
  4. zzp 3 inch cat catback
  5. Stattama turbo kit T67
  6. built f40 or zzp 4t65ehd
  7. 18 inch rims w/summer tires
  8. s1x cam, 125 springs, retainers
  9. e85
stattama turbo kit: http://shop.zzperformance.com/store/p/189-Stattama-Turbo-Kit-for-L36/L67.aspx
Im hoping by the end i can make about 450-500whp on 10-15lbs of boost. idk just hope
any parts suggestions or places to get the work done would be great! opinions are welcome as well!
anything i should do to the bottom end?
 
Last edited:


Why put a blower cam in? If you're going to put a cam in during your turbo process, do a turbo cam.
Edit: Also, go with way stiffer valve springs.
 
Yeah go with an XP or S1x. Both still work well with a turbo, and give bigger lift than the stattama. The XP i believe will bleed off more of the boost. The S1x should help you with more low end torque. But either over the VS.
 
3k ill sell a modded cartuning kit with a t70 turbo kit and st5 cam with hv3 prj fuel rails......

also screw the shorter dog bones just makes less room for turbo downpipe and dont need a catback exhaust.

st5 cam is going to require 130# or 150# springs and some head work.

j
 


chrsmi1 said:
just like that? jumped up $1500 like it was nothing. Must be nice...
Click to expand...
well what i was planning on for the z7 it was about 5k anyway and stattama has all that plus a few more things for basically the same. but this is a long term build. i am going to have to do alot of saving
 
98MailboyVet said:
3k ill sell a modded cartuning kit with a t70 turbo kit and st5 cam with hv3 prj fuel rails......

also screw the shorter dog bones just makes less room for turbo downpipe and dont need a catback exhaust.

st5 cam is going to require 130# or 150# springs and some head work.

j
Click to expand...

Just sitting there forever, doing nothing when they could be in a nice engine bay!!!

: )
 
didnt your already have a turbo build thread? you sure make alot of threads about modding.
you should make a thread about your car in the member ride thread.
 


Me? Im about to leave for a deployment again, so I'd sell items for the right price, and I will not break up the turbo kit and fuel rails so yes that's a 3000 dollar set of prj fuel rails with a pile of other parts to go with it HAHA!

As for sitting yes caged car is in my spare garage and E85/S1X car is my daily.

Sorry for the thread jack.
 
You must log in or register to reply here.
Back
Top