• First you will click on post new thread

    Then you will title your new thread with your cars Year Make and Model

    Then in the text body section you will put a brief description of your tunes mods so that other users can get a tune that is closely similar to their own setups

    Then you will click on the icon that looks like a paper clip(it can be found near the button that changes the color of your font and right next to the smileys button)

    Then you will click on the green + button in the upper right hand corner that says ADD FILE

    Then you will click on CHOOSE FILE

    After selecting your bin file you will then click the little red button that says UPLOAD

    When that is done it should add your bin file to the attachments section on the lower part of that screen

    make sure your bin file has a check mark next to it

    then click INSERT INLINE

    Then Click DONE

    Your file will now be attached to your original text body



    Only certain file types are allowed... IF for some reason it wont allow you to upload a file type feel free to get ahold of one of the members of the moderation team to see if we can correct your issue.
  • The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

tuning out secondary air and have emissions readiness show as complete or n/a

Billycar11

Billycar11

New member


i have to turn the evap ones off for air pump to pass? because i evap will ready eventually just takes a while also do i leave the ses enable box checked or uncheck it? for all those codes
 
you want to un check the enable ses light, then set to no report.

delete anything evap, or air pump listed and those things should be ready when you fire it up the firs time. iirc theres a evap code thats in the 1400 or 1600's
 
ok im going to disable the rest then flash it, so it will be ready right after a start if its working ok i tell you what happens in a few
Thanks
 
ok Scotty thanks that worked once you disable the whole system they show ready soon as key is turned on started it to make sure it stayed ready it did :)
 


You must log in or register to reply here.
Back
Top