tried to remove drl fuse...

[Pontiac Racer]

removed it so my lights would only come on at night. put the spare fuse in the fuse box in the engine. started the car then the lights started to flicker and there was a clicking noise that would not stop. flipped the nob to on for the lights and same thing. looks like ill always have drl

 

[Fivefingerdeathpunch]

Search brah.

It's because you have a 01+ car. Only 97-00 can pull the fuse, and when you pull the fuse you have only manual lights, no DRL or auto on.

Unplug the heatsink and re-install the fuse, I think that will fix your problem.

 

[camopaint0707]

this guys threads are just fantastic

 

[Pontiac Racer]

i like to think my threads are fantastic too

 

[Pontiac Racer]

i put the fuse back in and it stopped. do you know whats different about an 01 and 00 that it would do that?

 

[02NavyBlue]

Not sure technically. Just unplug the resistor with an aluminum heatsink for the DRL's. It's inside the small access door on the drivers side in the dash.

 

[Frosty]

^Heatsinks

 

[BillBoost37]

i like to think my threads are fantastic too

Don't fool yourself. You have a little more learning to do before we'll label them good, fantastic is a few steps up from that.

Now....my posts...This is how you should treat ...my posts >> :th_bowdown::th_bowdown: