• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Trany line diagram



Don't think one is really needed, two lines go from the trans to the radiator, flowing from the bottom to the top of the cooler.
 
Yes cause im trying to take off the bottem line on my 98 gtp. Its leaking right at the nut! I dont remove the nut? Cause the nut is in the radiator itself right? I know like 2000 and newer gp have diff ways of connecting lines?
 
I'm not sure, I have a 2002 and I'm pretty sure the nut can unscrew. Is the plastic cracked or something? It's probably loose.
 
It's all rusted. I thought the nut comes with the rad like when yu get a new one. And the line just. Slips out when the clips out. I got the plastic clip out that was in front. Think I see another one. I hope there's a write up or so. Caus this leak was bad
 
i was just looking all this up myself due to a rad change, slide that plastic ring back then theres a clip thats holding the line into that nut.

if need be that nut should come out. it did in the vid i watched on you tube.
 


It makes me wounder were the leak is I know it's at the nut but is there a o ring? The nut ain't movin for nothing. It's a 17 flare right
 


You must log in or register to reply here.
Back
Top